CX912 switching standards

28

The CX912 complies with the following standards:
? International standards: DCBX, FC-BB-5, FC-DA, FC-FS-2, FC-GS-5, FC-LS, FC-MI-2, FC-PI-4, FC-SW-4, FC-VI, FCP-3, IEEE 802.3x, IEEE 802.3z, IEEE 802.3aq, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.3ad, IEEE 802.1Qbg, IEEE 1149.1-2001, RFC2837, and SFF-8431.
? Industry standards: ECMA TR/70, EN60950, GR-929, IEC 812, IEC 863, IEC60297, IEC60950, IEC60825-1/2/6, IEC60215, IEC61000, Telcordia SR-332, and UL60950.

Other related questions:
Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Default IP address of CX912 FC
The default IP address of the CX912 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 10.77.77.77 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

Whether the CX912 supports GE or 10GE ports
The CX912 supports 10GE optical ports. The ports adapt to GE ports. The supported ports are as follows: ? 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports ? FC switching plane: 16 x 8G FC downlink ports (each half-width slot: 1 x 8G FC port) and 8 x 8G FC uplink ports

Standard spanning tree protocols used on S series switch
S series switches (except S1700 switches) support the following standard spanning tree protocols: 1. STP: Spanning Tree Protocol 2. RSTP: Rapid Spanning Tree Protocol, compatible with STP 3. MSTP: Multiple Spanning Tree Protocol, compatible with STP and RSTP By default, S series switches use MSTP. When running a command to set STP mode, you can select STP, RSTP, or MSTP. VLAN-Based Spanning Tree (VBST) is a Huawei proprietary spanning tree protocol, which sets up a spanning tree for each VLAN, so traffic in different VLANs can be forwarded through different spanning trees.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top