CX912 FC configuration


The following documents describe the CX912 FC switching plane configuration:
CX912 User Guide:
? C00 version:|9856522|21782478|19955021|19961380
? C10 version:|9856522|21782478|19955021|19961380

E9000 Deployment Guide:

MX210 Command Reference:|9856522|21782478|19955021|19961380

Other related questions:
Default IP address of CX912 FC
The default IP address of the CX912 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: Subnet mask: Default gateway:

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

How to configure an FC interface on a CE series switch
Before configuring an FC interface, install an FC optical module. If the LINK indicator of a service interface is steady green, the interface is in Up state. # Switch 10GE1/0/1 to an FC interface. system-view [~HUAWEI] port mode fc 10ge 1/0/1 Warning: This operation will cause all the other configurations on the port to be lost. Continue? [Y/N]:y [*HUAWEI] commit # After configuring an FC interface, check the interface status. If the physical state and protocol state of the interface are both UP, the interface has been enabled. [~HUAWEI] display interface fc 1/0/1 FC1/0/1 current state : UP (ifindex: 144) Line protocol current state : UP ......

Do CE series switches support the FC function
CE series switches support the FC function in V100R005C10 and later versions. Currently, only the CE6850U-HI supports the FC function.

Whether the CX912 supports GE or 10GE ports
The CX912 supports 10GE optical ports. The ports adapt to GE ports. The supported ports are as follows: ? 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports ? FC switching plane: 16 x 8G FC downlink ports (each half-width slot: 1 x 8G FC port) and 8 x 8G FC uplink ports

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top