CX911 management IP address configuration

4

You can log in to the CLI of a 10GE switching plane by entering the management IP address of the switching plane on a PC to perform maintenance, configuration, and debugging.
For details, see Configuring the IP Address of the Management Network Port in the user guide.

CX911 User Guide:
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000015894/?idPath=7919749|9856522|21782478|19955021|19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000036341/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
Default IP address of CX911 FC
The default IP address of the CX911 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

Configure the IP address of the management interface on AR routers
The procedure of changing the management IP addresses on the AR router is as follows: 1. You can configure a management IP address on the CLI using either of the following methods: a. Configure a management IP address on the management interface of the AR router. For example, the management interface is GE0/0/0. Set the management IP address to 192.168.1.10 and the mask length to 24. 2. On the VLANIF interface, configure the management IP address. Note: In the factory settings, all LAN interfaces on the AR150&AR160&AR200&AR120&-S&AR150-S&AR160-S&AR200-S are added to VLAN 1 by default. The default IP address 192.168.1.1/24 is configured for VLAN 1. Any LAN interface can use this IP address as the management IP address. The procedure for changing the IP address of VLAN 1 is as follows: For example, when LAN ports of the AR150 are added to VLAN 1, configure the management IP address as 192.168.1.10 and set the mask length to 24. system-view [Huawei] vlan 1 [Huawei-vlan1] quit [Huawei] interface vlanif 1 [Huawei-Vlanif1] ip address 192.168.1.10 24 [Huawei-Vlanif1] quit 2. Configure the management IP address through the web platform. Log in to the web platform, access WAN Access, and find the corresponding management interface in Ethernet Interface. Click the Modify under Operation on the right of the interface to configure an IP address for the corresponding interface.

E9000 switch module configuration assistant
Go to Link.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top