CX911 CLI login methods

9

You can log in to the CX911 CLI by using the following modes:
? SSH mode (remote)
? SOL mode (remote)
? SYS serial port mode (local, a BMC serial port is required for plane switchover)

For details, see Logging In to the CLI of Each Switching Plane in the user guide.
CX911 User Guide:
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000015894/?idPath=7919749|9856522|21782478|19955021|19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000036341/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
Number of concurrent server BMC connections
The WebUI of server iBMC or iMana supports a maximum of four concurrent logins. The CLI supports a maximum of five concurrent logins.

Default IP address of CX911 FC
The default IP address of the CX911 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

E9000 switch module configuration assistant
Go to Link.

How can I disable the MCU web login function in CLI mode?
To disable the MCU web login function in CLI mode, perform the following operations: Log in to the MCU main control board in Telnet or SSH2 mode (the user name and password are admin and admin or admin and Change_Me). Access the system configuration interface. Then, run the following commands: sys [HUAWEI VP9630]telnet-config [HUAWEI VP9630-Telnet]enable- enable-http enable-logon enable-network-login enable-security-mode //Set enable-http to 0 to disable the web login function. [HUAWEI VP9630-Telnet]enable-network-login enable-network-login [HUAWEI VP9630-Telnet]enable-network-login - mode{0:only enable FE0, 1:only enable GE0, 2:only enable GE1 3:enable all interface, default:3} //For security purposes, you may need to disable some ports.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top