CX911 Ethernet switching configuration

1

The following documents describe the CX911 10GE switching plane configuration:

CX911 User Guide:
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000015894/?idPath=7919749|9856522|21782478|19955021|19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000036341/?idPath=7919749|9856522|21782478|19955021|19961380

E9000 Deployment Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000038842/?idPath=7919749|9856522|21782478|19955021|19961380

Switch module Ethernet configuration summary:
http://support.huawei.com/huaweiconnect/enterprise/forum.php?mod=viewthread&tid=228251

Other related questions:
E9000 switch module configuration assistant
Go to Link.

Switching over the E9000 switching plane
For details about how to switch over the switching module, see "Logging In to the CLI of Each Switching Plane" in the user guide of the switch module. For example, if the switch module is CX911, click Link.

Default IP address of CX911 FC
The default IP address of the CX911 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

Configuring an Ethernet subinterface on the firewall
Configure the Layer 3 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number.subinterface-number command to access the Ethernet subinterface view. 3. Run the ip address ip-address { mask | mask-length } [ sub ] command to configure the IP address of the Ethernet subinterface. 4. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the Ethernet subinterface and associate a VLAN ID with the subinterface. Configure the Layer 2 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number command to enter the interface view. 3. Run the portswitch command to configure a Layer 3 Ethernet interface to work in Layer 2 mode. 4. Run the quit command to return to the system view. 5. Run the interface interface-type interface-number.subinterface-number command to create a subinterface and access the subinterface view. 6. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the subinterface and associate a VLAN ID with the subinterface. 7. Run the portswitch command to configure the subinterface as a Layer 2 subinterface.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top