CX911 zone configuration

1

Zone configuration is required only when a network requires isolated nodes for security purposes. In addition, access permission to different devices that are connected to the same switch is configured.
For details, see Configuring Zones in the CX911 User Guide.
CX911 User Guide:
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000015894/?idPath=7919749|9856522|21782478|19955021|19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000036341/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
E9000 switch module configuration assistant
Go to Link.

Default IP address of CX911 FC
The default IP address of the CX911 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

Whether switch modules used on the E9000 are hot-swappable
The E9000 provides four slots to install switch modules. Switch modules in slots 2X and 3X are in a pair, and switch modules in slots 1E and 4E are in a pair. The two switch modules in a pair of slots can operate independently, in 1+1 redundancy mode, or in load sharing mode by working with the OS and NICs.

Whether the CX911 supports GE or 10GE ports
The CX911 supports 10GE optical ports. The ports adapt to GE ports. The supported ports are as follows: ? 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports ? FC switching plane: 12 x FCoE downlink ports connected to slots 1 to 12, 4 x FC downlink ports connected to slots 13 to 16, and 8 x 8G FC uplink ports

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top