Whether the CX911 supports L3 switching

10

The CX911 delivered in 2013 does not support L3 switching and stacking. If these functions are required, you can upgrade the software.

Other related questions:
Whether the CX311 supports L3 switching
The CX311 supports L3 switching.

Whether the CX911 supports GE or 10GE ports
The CX911 supports 10GE optical ports. The ports adapt to GE ports. The supported ports are as follows: ? 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports ? FC switching plane: 12 x FCoE downlink ports connected to slots 1 to 12, 4 x FC downlink ports connected to slots 13 to 16, and 8 x 8G FC uplink ports

Whether USG firewalls support VLAN communications through L3 subinterfaces
The USG firewalls support VLAN communications through L3 subinterfaces.

Whether switch modules used on the E9000 support NAT
The switch modules used on the E9000 do not support the NAT function.

Switching over the E9000 switching plane
For details about how to switch over the switching module, see "Logging In to the CLI of Each Switching Plane" in the user guide of the switch module. For example, if the switch module is CX911, click Link.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top