CX910 Ethernet switching configuration

2

The following documents describe the CX910 10GE switching plane configuration:

CX910 User Guide:
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000015891/?idPath=7919749|9856522|21782478|19955021|19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000036339/?idPath=7919749|9856522|21782478|19955021|19961380

E9000 Deployment Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000038842/?idPath=7919749|9856522|21782478|19955021|19961380

Switch module Ethernet configuration summary:
http://support.huawei.com/huaweiconnect/enterprise/forum.php?mod=viewthread&tid=228251

Other related questions:
Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Configuring an Ethernet subinterface on the firewall
Configure the Layer 3 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number.subinterface-number command to access the Ethernet subinterface view. 3. Run the ip address ip-address { mask | mask-length } [ sub ] command to configure the IP address of the Ethernet subinterface. 4. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the Ethernet subinterface and associate a VLAN ID with the subinterface. Configure the Layer 2 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number command to enter the interface view. 3. Run the portswitch command to configure a Layer 3 Ethernet interface to work in Layer 2 mode. 4. Run the quit command to return to the system view. 5. Run the interface interface-type interface-number.subinterface-number command to create a subinterface and access the subinterface view. 6. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the subinterface and associate a VLAN ID with the subinterface. 7. Run the portswitch command to configure the subinterface as a Layer 2 subinterface.

Whether the CX910 supports GE or 10GE ports
The CX910 supports 10GE optical ports. The ports adapt to GE ports. Ports supported by the 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports

Method used to secure Ethernet switches in the cabinet
Method used to secure Ethernet switches in the cabinet: Install mounting ears matching Ethernet switches and secure Ethernet switches by securing the mounting ears in the mounting bar on the cabinet.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top