CX910 performance


The network switching performance provided by the CX910 10GE switching plane is described as follows:
Supports 1.28 Tbit/s switching capacity.
Supports a packet forwarding rate of 960 Mpps.
Supports 131072 MAC addresses.
Supports 4063 VLANs.
Supports 128 Eth-Trunk ports (each Eth-Trunk port can be added with a maximum of 16 member ports.)
Supports 16384 ARPs.
Supports 9216-byte jumbo frames.
Each port supports eight queues.
Supports CAR (ingress: 2048; egress: 1024).
Supports 4 MB packet cache.
Supports ACLv4 (pre-ingress: 750; ingress: 1500; egress: 1000).
Supports 128 VRFs (MPLS is not supported).
Supports 16384 VPN routes.
Supports 16384 route entries.
Supports 16384 IPv4 FIBs and 8000 (the mask length is not longer than 64) IPv6 FIBs.
Supports 4000 L3 multicast forwarding entries.
Supports BFD: 128 BFD sessions, and the minimum interval for receiving and sending packets is 50 ms.
Supports VRRP: 64 VRRP backup groups; 64 VRRP management groups; each VRRP backup group supports 16 virtual IP addresses.
Supports a maximum of 48 MSTP instances.
Supports TRILL: 512 network nodes; 4062 CE-VLANs; 16-link load sharing specifications.

Other related questions:
Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Whether the CX910 supports GE or 10GE ports
The CX910 supports 10GE optical ports. The ports adapt to GE ports. Ports supported by the 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports

Dorado performance
For the performance of Dorado series products, see: Software Specifications. For the performance of other versions, search for the performance in the corresponding product documentation.

What are the performance and capacity specifications of the TE10?
The performance and capacity specifications of the TE10 are listed as follows: Call bandwidth (IP): 64 kbit/s to 2 Mbit/s Conference bandwidth: 720p 30 fps with a minimum bandwidth of 384 kbit/s 4SIF/4CIF with a minimum bandwidth of 128 kbit/s SIF/CIF/SQSIF/SQCIF/QSIF/QCIF with a minimum bandwidth of 64 kbit/s Presentation resolution: AirPresence: up to 1080p 5 fps or 720p 15 fps Dual-stream (video + presentation) capability: a maximum of 720p 30 fps for video and 1080p 5 fps for presentation or 720p 30 fps for video and 720p 15 fps for presentation Other video features: VideoIntensifier, ViewProcessing, and Super Error Concealment (SEC) Audio features: acoustic echo cancellation (AEC), automatic noise suppression (ANS), automatic gain control (AGC), VoiceClear, AudioEnhancer, and lip synchronization Wi-Fi capability: dual frequency bands, that is, 2.4 GHz and 5 GHz

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top