Whether the CX910 supports L3 switching

4

The CX910 of the C00 version does not support L3 switching, but the CX910 of the C10 version supports this function.

Other related questions:
Whether the CX311 supports L3 switching
The CX311 supports L3 switching.

Whether the CX910 supports GE or 10GE ports
The CX910 supports 10GE optical ports. The ports adapt to GE ports. Ports supported by the 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports

Whether USG firewalls support VLAN communications through L3 subinterfaces
The USG firewalls support VLAN communications through L3 subinterfaces.

Does the L2/L3 interface of an interface card of an AR router support being converted to be working in L3 mode
Check whether the Layer 3 Ethernet interface is switched over to a Layer 2 Ethernet interface. The procedure of converting the Layer 2 mode of a physical interface to the Layer 3 mode is as follows: 1. Choose LAN access > LAN > Physical interface to enter the physical interface configuration page. 2. In the operation column of the physical interface list, click the icon at the right side of details corresponding to a desired physical interface to switch over the physical interface between Layer 2 mode and Layer 3 mode. 3. In the prompt dialog box, click Yes to confirm the switchover.

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top