Whether the CX910 supports stacking

4

The CX910 of the C00 version does not support stacking. The CX910 of the C10 version supports stacking and provides two 40GE ports that are connected to the midplane for interconnecting or stacking modules.

Other related questions:
Whether the CX910 supports GE or 10GE ports
The CX910 supports 10GE optical ports. The ports adapt to GE ports. Ports supported by the 10GE switching plane: 32 x 10GE downlink ports (each half-width slot: 2 x 10GE) and 16 x 10GE uplink optical ports

Whether the firewall supports stacking
No.

Whether USG firewalls support the stacking feature
USG firewalls do not support the clustering or stacking function. You can configure hot standby to improve reliability.

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Whether S series fixed switches support stacking
The Typical Configuration Examples document describes whether each model and version of S series fixed switches (except S1700 switches) supports stacking as well as stack modes, hardware and software requirements, typical networking, and configuration steps. For details, click Typical Configuration Examples and choose Typical Stack Configuration of Fixed Switches- Determining the Stack Connection Mode and Hardware and Software Requirements.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top