CX610 indicators

4

The CX610 supports the following indicators:
Power status indicator (SATA):
? Off: The switch module is not powered on.
? Steady green: The switch module is operating properly.

Health status indicator (HLY):
? Off: The switch module is not powered on.
? Steady green: The switch module is operating properly.
? Blinking red (1 Hz): A major alarm is generated.
? Blinking red (4 Hz): A critical alarm is generated.
? Blinking red (5 Hz): The switch module is not securely installed.
Note: It is difficult to identify the blinking frequencies of 4 Hz and 5 Hz. You are advised to check whether the device is properly installed and then whether an alarm is generated when the indicator is quickly blinking red.

Optical port status indicator:
? Off: The port is not connected.
? Steady green: The port is properly connected.
? Blinking green: Data is being sent or received over the port.

Other related questions:
Indication of the red alarm indicator on the Metro 1000
If the alarm indicator on the Metro 1000 is steady red, a critical alarm is generated. You need to check it on the NMS.

Meaning of colors of interface indicators on the S1700
For details about the meaning of each color of the indicators on the S1700, click S1700 Products Description and choose Hardware Structure > Indicator.

Indication when the SRV indicator on the TOM board is red
The SRV indicator is a service alarm indicator. The indicator status is described as follows: On (green): The service is normal. On (red): A critical or major service alarm is present. On (yellow): A minor or remote service alarm is present. Off: No service is configured.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top