CX31x Monitor Link configuration

1

Monitor Link is a port association mechanism that monitors the uplink ports connected to a device and triggers the up/down status changes of downlink ports according to the up/down status changes of uplink ports and then triggers the topology protocols on downstream devices to perform link switchovers.
If a downstream device is connected to an upstream device through a single uplink, a single point of failure will result in service interruption. If the dual-uplink mode is used, a downstream device is connected to two upstream devices to reduce the impact of single points of failure, thereby improving network reliability.

For details about the CX31x Monitor Link configuration, see the following documents.
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000044778/?idPath=7919749|9856522|21782478|19955021|19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000041694/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
Meaning of the CX31x converged switching
Converged switching (which is not strictly defined) indicates the switching that adopts DCB Ethernet switches that support FCoE traffic and E9000 CX310, CX311, and CX312 converged switch modules. Converged networking (which is not strictly defined) indicates the Ethernet networking in the server field that bears the traditional Ethernet data traffic and FCoE traffic. This Ethernet networking must be based on the DCB feature.

Default user name and password of the CX31x
The default user name and password of the BMC and converged switching plane of the CX31x are as follows: Default user name: root Default password: Huawei12#$ The default user name and password of the FCoE gateway (available only for the CX311) are as follows: Default user name: admin Default password: Huawei12#$

BFD and VRRP association on S series switch
For details about BFD for VRRP configuration on an S series switch, except S1700, see Example for Configuring Association Between VRRP and BFD to Implement a Rapid Active/Standby Switchover in the S1720&S2700&S3700&S5700&S6700&S7700&S9700 Typical Configuration of Typical Features.The configurations on all models are the same.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top