CX31x VLAN configuration

0

The VLAN technology means that a physical LAN is partitioned to create multiple distinct broadcast domains (multiple VLANs). It has the following features:
? Limits broadcast domains. A broadcast domain is limited within one VLAN, which reduces the bandwidth and improves the network processing capability.
? Enhances LAN security. VLANs are mutually isolated so that packets cannot pass between VLANs directly.
? Improves network robustness. A fault occurring in one VLAN does not affect other VLANs.
? Flexibly sets up virtual working groups. The VLAN technology allocates users to different working groups, and users within one working group may be not from a fixed region. This facilitates network construction and maintenance.

For details about the CX31x VLAN configuration, see the following documents.
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000044778/?idPath=7919749|9856522|21782478|19955021|19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000041694/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
Meaning of the CX31x converged switching
Converged switching (which is not strictly defined) indicates the switching that adopts DCB Ethernet switches that support FCoE traffic and E9000 CX310, CX311, and CX312 converged switch modules. Converged networking (which is not strictly defined) indicates the Ethernet networking in the server field that bears the traditional Ethernet data traffic and FCoE traffic. This Ethernet networking must be based on the DCB feature.

Default user name and password of the CX31x
The default user name and password of the BMC and converged switching plane of the CX31x are as follows: Default user name: root Default password: Huawei12#$ The default user name and password of the FCoE gateway (available only for the CX311) are as follows: Default user name: admin Default password: Huawei12#$

Configure the service VLAN and management VLAN
Configure the service VLAN and management VLAN. 1. Service VLAN - Command output on the AC: [HUAWEI]wlan [HUAWEI-wlan-view]service-set name test [HUAWEI-wlan-service-set-test]service-vlan 100 Multiple service sets have access to different service VLANs. 2. Management VLAN - Configure PVID and untag for the management VLAN on the switch connected to the AP. Allow packets from the management VLAN to pass through. - On Fit APs, no configuration is required for the interfaces connected to the switch. - On Fat APs, the configurations for wired-side interfaces are the same as the configurations for the interfaces on the switch. Note: 1. It is recommended that you configure the service VLAN and management VLAN differently, and do not use VLAN 1 for both VLANs. 2. In normal cases, there is only one management VLAN, but multiple service VLANs can be configured as required. 3. A service set can contain only one service VLAN. 4. In tunnel forwarding, the switch between the AP and AC does not allow packets from service VLANs to pass through, but in direct forwarding, the switch must allow packets to pass through. 5. If the service VLAN or management VLAN is changed, VLAN configurations on the devices along the path must be modified. If the network is newly deployed, you are advised to dial 400-822-9999 to seek assistance from Huawei's presale team to perform the network planning first.

How to configure the VLAN on the U1981?
1. Run the config set vlan mode enable command to enable the VLAN function. 2. Run the following command to set QoS rules: config add qos ruleid 2 rulename media protocoltype udp beginport 6000 endport 10095 vlanid 2 vlan_priority 2 rfc_type tos rfc_priority 2 rfc_servertype mindelay

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top