CX312 performance

0

The network switching performance provided by CX312 is described as follows:
? Supports 1.28 Tbit/s switching capacity.
? Supports a packet forwarding rate of 960 Mpps.
? Supports 131072 MAC addresses.
? Supports 4063 VLANs.
? Supports 128 Eth-Trunk ports (each Eth-Trunk port can be added with a maximum of 16 member ports.)
? Supports 16384 ARPs.
? Supports 9216-byte jumbo frames.
? Each port supports eight queues.
? Supports CAR (ingress: 2048; egress: 1024).
? Supports 4 MB packet cache.
? Supports ACLv4 (pre-ingress: 750; ingress: 1500; egress: 1000).
? Supports 128 VRFs (MPLS is not supported).
? Supports 16384 VPN routes.
? Supports 16384 route entries.
? Supports 16384 IPv4 FIBs and 8000 (the mask length is not longer than 64) IPv6 FIBs.
? Supports 4000 L3 multicast forwarding entries.
? Supports BFD: 128 BFD sessions, and the minimum interval for receiving and sending packets is 50 ms.
? Supports VRRP: 64 VRRP backup groups; 64 VRRP management groups; each VRRP backup group supports 16 virtual IP addresses.
? Supports a maximum of 48 MSTP instances.
? Supports TRILL: 512 network nodes; 4062 CE-VLANs; 16-link load sharing specifications.

Other related questions:
CX312 ports
The CX312 provides the following external ports: ? One BMC serial port, which is used for logging in to the BMC CLI. ? One SYS serial port, which is used for local management, maintenance, and GE switching plane commissioning. ? Twenty-four 10GE optical ports or six 40GE optical ports, which are used for exchanging data with external networks. The CX312 provides the following internal ports: ? Thirty-two 10GE ports, which are connected to half-width compute node slots 1 to 16. ? One 40GE port, which is used to interconnect the 10GE switching planes on switch modules in slots 1E and 4E or in slots 2X and 3X. ? Two GE ports, which are connected to the two MM910s respectively for communicating with the internal ports eth0 and eth2 on the MM910s.

Dorado performance
For the performance of Dorado series products, see: Software Specifications. For the performance of other versions, search for the performance in the corresponding product documentation.

What are the performance and capacity specifications of the TE10?
The performance and capacity specifications of the TE10 are listed as follows: Call bandwidth (IP): 64 kbit/s to 2 Mbit/s Conference bandwidth: 720p 30 fps with a minimum bandwidth of 384 kbit/s 4SIF/4CIF with a minimum bandwidth of 128 kbit/s SIF/CIF/SQSIF/SQCIF/QSIF/QCIF with a minimum bandwidth of 64 kbit/s Presentation resolution: AirPresence: up to 1080p 5 fps or 720p 15 fps Dual-stream (video + presentation) capability: a maximum of 720p 30 fps for video and 1080p 5 fps for presentation or 720p 30 fps for video and 720p 15 fps for presentation Other video features: VideoIntensifier, ViewProcessing, and Super Error Concealment (SEC) Audio features: acoustic echo cancellation (AEC), automatic noise suppression (ANS), automatic gain control (AGC), VoiceClear, AudioEnhancer, and lip synchronization Wi-Fi capability: dual frequency bands, that is, 2.4 GHz and 5 GHz

What is the media performance for VCN3010
A VCN3010 supports 256-channel cameras or 512 Mbit/s mediastreams.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top