Whether the CX312 supports stacking

2

The CX312 supports stacking and provides 1 x 40GE port that is connected to the midplane for interconnecting.

Other related questions:
CX312 ports
The CX312 provides the following external ports: ? One BMC serial port, which is used for logging in to the BMC CLI. ? One SYS serial port, which is used for local management, maintenance, and GE switching plane commissioning. ? Twenty-four 10GE optical ports or six 40GE optical ports, which are used for exchanging data with external networks. The CX312 provides the following internal ports: ? Thirty-two 10GE ports, which are connected to half-width compute node slots 1 to 16. ? One 40GE port, which is used to interconnect the 10GE switching planes on switch modules in slots 1E and 4E or in slots 2X and 3X. ? Two GE ports, which are connected to the two MM910s respectively for communicating with the internal ports eth0 and eth2 on the MM910s.

Whether the firewall supports stacking
No.

Whether USG firewalls support the stacking feature
USG firewalls do not support the clustering or stacking function. You can configure hot standby to improve reliability.

Whether S series fixed switches support stacking
The Typical Configuration Examples document describes whether each model and version of S series fixed switches (except S1700 switches) supports stacking as well as stack modes, hardware and software requirements, typical networking, and configuration steps. For details, click Typical Configuration Examples and choose Typical Stack Configuration of Fixed Switches- Determining the Stack Connection Mode and Hardware and Software Requirements.

Whether the configuration of an S series fixed switch stack changes after the stack splits
After a stack is set up, all stack member switches function as one switch on a network. The configuration of the stack is the configuration of the master switch, which is synchronized to the standby switch by the master switch. If a fault occurs on the master switch and the master switch restarts, the standby switch does not restart and function as the master switch. That is, the configuration of the stack does not change.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top