CX311 indicators

5

The CX311 supports the following indicators:

? Stacking status indicator (SATA):
Off: The switch module is not powered on.
Blinking green (the first 10 times): The switch module is being powered on.
Blinking green: The switch module is standby in stacking mode and is operating properly.
Steady green: The switch module is active in stacking mode or is not stacked, and is operating properly.

? Health status indicator (HLY):
Off: The switch module is not powered on.
Steady green: The switch module is operating properly.
Blinking red (1 Hz): A major alarm is generated.
Blinking red (4 Hz): A critical alarm is generated.
Blinking red (5 Hz): The switch module is not securely installed.

Offline button/indicator (OFL): currently invalid (reserved)

? Data transmission status indicator for the 10GE optical port:
Off: No data is being transmitted over the port.
Blinking orange: Data is being sent or received over the port.

? Connection status indicator for the 10GE optical port:
Off: The port is not connected or not properly connected.
Steady green: The port is properly connected.

? Data transmission status indicator for the 8G FC optical port (A):
Off: No data is being transmitted over the port.
Blinking orange (twice/second): A high temperature alarm has been generated if the green indicator (L) is blinking twice per second at the same time.
Blinking orange (more than twice/second): Data is being sent or received over the port.

? Connection status indicator for the 8G FC optical port (L):
Off: No optical module is installed, or an exception occurs when the port is receiving optical signals.
Steady green: The port is properly connected.
Blinking green (once/second): The device is registering or the port is in the diagnosis state.
Blinking green (twice/second): The port is not properly connected or the port is faulty. If the orange indicator (A) is blinking twice per second at the same time, a high temperature alarm has been generated.

Other related questions:
Whether the CX311 supports L3 switching
The CX311 supports L3 switching.

Default user name and password of the CX31x
The default user name and password of the BMC and converged switching plane of the CX31x are as follows: Default user name: root Default password: Huawei12#$ The default user name and password of the FCoE gateway (available only for the CX311) are as follows: Default user name: admin Default password: Huawei12#$

Default IP address of CX311 FCoE
The default IP address of the CX311 FCoE gateway is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

Meaning of the CX31x converged switching
Converged switching (which is not strictly defined) indicates the switching that adopts DCB Ethernet switches that support FCoE traffic and E9000 CX310, CX311, and CX312 converged switch modules. Converged networking (which is not strictly defined) indicates the Ethernet networking in the server field that bears the traditional Ethernet data traffic and FCoE traffic. This Ethernet networking must be based on the DCB feature.

Compatibility between E9000 switch modules and subcards of blades
For details about the mapping between the E9000 switch modules and the mezzanine cards of the blades, see http://support.huawei.com/huaweiconnect/enterprise/thread-268293.html.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top