CX311 Ethernet switching configuration

0

The following documents describe the CX311 10GE switching plane configuration:

CX311 User Guide:
? C00 version:
http://support.huawei.com/enterprise/en/doc/DOC1000018097/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380
? C10 version:
http://support.huawei.com/enterprise/en/doc/DOC1000068627/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

E9000 Deployment Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000038842/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Switch module Ethernet configuration summary:
http://support.huawei.com/huaweiconnect/enterprise/forum.php?mod=viewthread&tid=228251

Other related questions:
Meaning of the CX31x converged switching
Converged switching (which is not strictly defined) indicates the switching that adopts DCB Ethernet switches that support FCoE traffic and E9000 CX310, CX311, and CX312 converged switch modules. Converged networking (which is not strictly defined) indicates the Ethernet networking in the server field that bears the traditional Ethernet data traffic and FCoE traffic. This Ethernet networking must be based on the DCB feature.

Whether the CX311 supports L3 switching
The CX311 supports L3 switching.

Default user name and password of the CX31x
The default user name and password of the BMC and converged switching plane of the CX31x are as follows: Default user name: root Default password: Huawei12#$ The default user name and password of the FCoE gateway (available only for the CX311) are as follows: Default user name: admin Default password: Huawei12#$

Default IP address of CX311 FCoE
The default IP address of the CX311 FCoE gateway is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

Configuring an Ethernet subinterface on the firewall
Configure the Layer 3 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number.subinterface-number command to access the Ethernet subinterface view. 3. Run the ip address ip-address { mask | mask-length } [ sub ] command to configure the IP address of the Ethernet subinterface. 4. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the Ethernet subinterface and associate a VLAN ID with the subinterface. Configure the Layer 2 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number command to enter the interface view. 3. Run the portswitch command to configure a Layer 3 Ethernet interface to work in Layer 2 mode. 4. Run the quit command to return to the system view. 5. Run the interface interface-type interface-number.subinterface-number command to create a subinterface and access the subinterface view. 6. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the subinterface and associate a VLAN ID with the subinterface. 7. Run the portswitch command to configure the subinterface as a Layer 2 subinterface.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top