Whether the CX311 supports stacking

0

The CX311 supports stacking.
? Provides 1 x 40GE port that is connected to the midplane for stacking modules.
? If you need higher stacking bandwidth, you can add stacking connections by using panel ports.
? A maximum of four switch modules in a chassis can be stacked.

Other related questions:
Whether the CX311 supports L3 switching
The CX311 supports L3 switching.

Whether the firewall supports stacking
No.

Whether USG firewalls support the stacking feature
USG firewalls do not support the clustering or stacking function. You can configure hot standby to improve reliability.

Whether S series fixed switches support stacking
The Typical Configuration Examples document describes whether each model and version of S series fixed switches (except S1700 switches) supports stacking as well as stack modes, hardware and software requirements, typical networking, and configuration steps. For details, click Typical Configuration Examples and choose Typical Stack Configuration of Fixed Switches- Determining the Stack Connection Mode and Hardware and Software Requirements.

Default user name and password of the CX31x
The default user name and password of the BMC and converged switching plane of the CX31x are as follows: Default user name: root Default password: Huawei12#$ The default user name and password of the FCoE gateway (available only for the CX311) are as follows: Default user name: admin Default password: Huawei12#$

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top