Does the AR router NAT Server and NAT Outbound have port conflicts?

14

No, AR router NAT Server and NAT Outbound does not exist port conflict.

Other related questions:
Do interfaces conflict when the NAT server and outbound NAT are configured on the AR router
Interfaces do not conflict when the NAT server and outbound NAT are configured on the AR router.

Can outbound NAT and NAT server be configured simultaneously on an AR
On an AR router, outbound NAT and NAT server can be configured simultaneously on an interface. For detailed configurations, see "Internet Access > NAT > Example for Configuring NAT to Enable Users to Access the Internet and Provide the WWW Service Externally" in the Typical Configuration Examples.

What is the difference between the Static NAT and NAT Server on AR router?
The difference between NAT Server and NAT Static configuration is: NAT Server to access the Internet from intranet, only do address replace, but NAT Static for network address; active access outside the network will also replace the address and port number.

Whether AR NAT Server Global address is NAT Outbound address in the address pool?
Yes

Explain the nat outbound address-group command on the AR router
The nat outbound acl-number address-group group-index command associates an ACL with an address pool. In this manner, the addresses specified in the ACL can be translated by using the address pool. The undo nat outbound acl-number address-group group-index command disassociates the ACL from an address pool. address-group group-index in the command indicates that the address pool is used for address translation.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top