CX310 switching standards

4

The CX310 complies with the following standards:
? International standards: DCBX, FC-BB-5, FC-DA, FC-FS-2, FC-GS-5, FC-LS, FC-MI-2, FC-PI-4, FC-SW-4, FC-VI, FCP-3, IEEE 802.3x, IEEE 802.3z, IEEE 802.3aq, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.3ad, IEEE 802.1Qbg, IEEE 1149.1-2001, RFC2837, and SFF-8431.
? Industry standards: ECMA TR/70, EN60950, GR-929, IEC 812, IEC 863, IEC60297, IEC60950, IEC60825-1/2/6, IEC60215, IEC61000, Telcordia SR-332, and UL60950.

Other related questions:
CX310 ports
The CX310 provides the following external ports: ? One BMC serial port, which is used for logging in to the BMC CLI. ? One SYS serial port, which is used for local management, maintenance, and GE switching plane commissioning. ? Sixteen 10GE optical ports, which are used for exchanging data with external networks. The CX310 provides the following internal ports: ? Thirty-two 10GE ports, which are connected to half-width compute node slots 1 to 16. The subcards corresponding to the slots are numbered from 1 to 16. ? One 40GE port, which is used to interconnect the switch modules in slots 1E and 4E or in slots 2X and 3X. ? Two GE ports, which are connected to the two MM910s respectively for communicating with the internal ports eth0 and eth2 on the MM910s.

Default user name and password of the CX31x
The default user name and password of the BMC and converged switching plane of the CX31x are as follows: Default user name: root Default password: Huawei12#$ The default user name and password of the FCoE gateway (available only for the CX311) are as follows: Default user name: admin Default password: Huawei12#$

Standard spanning tree protocols used on S series switch
S series switches (except S1700 switches) support the following standard spanning tree protocols: 1. STP: Spanning Tree Protocol 2. RSTP: Rapid Spanning Tree Protocol, compatible with STP 3. MSTP: Multiple Spanning Tree Protocol, compatible with STP and RSTP By default, S series switches use MSTP. When running a command to set STP mode, you can select STP, RSTP, or MSTP. VLAN-Based Spanning Tree (VBST) is a Huawei proprietary spanning tree protocol, which sets up a spanning tree for each VLAN, so traffic in different VLANs can be forwarded through different spanning trees.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top