Configuring the management IP address of the CX210

2

For details, see "Configuring the IP Address Using the MM910" in the CX210 Switch Module V100R001C10 User Guide.

CX210 user guide: http://support.huawei.com/enterprise/en/doc/DOC1000053379/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Other related questions:
Configure the IP address of the management interface on AR routers
The procedure of changing the management IP addresses on the AR router is as follows: 1. You can configure a management IP address on the CLI using either of the following methods: a. Configure a management IP address on the management interface of the AR router. For example, the management interface is GE0/0/0. Set the management IP address to 192.168.1.10 and the mask length to 24. 2. On the VLANIF interface, configure the management IP address. Note: In the factory settings, all LAN interfaces on the AR150&AR160&AR200&AR120&-S&AR150-S&AR160-S&AR200-S are added to VLAN 1 by default. The default IP address 192.168.1.1/24 is configured for VLAN 1. Any LAN interface can use this IP address as the management IP address. The procedure for changing the IP address of VLAN 1 is as follows: For example, when LAN ports of the AR150 are added to VLAN 1, configure the management IP address as 192.168.1.10 and set the mask length to 24. system-view [Huawei] vlan 1 [Huawei-vlan1] quit [Huawei] interface vlanif 1 [Huawei-Vlanif1] ip address 192.168.1.10 24 [Huawei-Vlanif1] quit 2. Configure the management IP address through the web platform. Log in to the web platform, access WAN Access, and find the corresponding management interface in Ethernet Interface. Click the Modify under Operation on the right of the interface to configure an IP address for the corresponding interface.

Change the management IP address of the S1728GWR-4P switch
Change the management IP address of an S1728GWR-4P switch as follows: Choose System > IP. On the page displayed, configure the switch information such as the management VLAN and IP address. By default, the switch obtains an IP address through DHCP. If the switch fails to obtain an IP address through DHCP, the switch uses the IP address of 192.168.0.1. Perform the following operation to configure the switch to obtain an IP address through DHCP: 1. Choose System > IP. 2. Specify an available management VLAN for the switch and set IP地址方式 to DHCP. 3. Click Apply to save the configuration. 4. Click Restart DHCP to obtain a new IP address. Perform the following operations to configure a static IP address for the switch: 1. Choose System > IP. 2. Specify an available management VLAN for the switch, set IP Address Mode to Static, and enter an IP address, subnet mask, and gateway IP address. 3. Click Apply to save the configuration.

How to configure an IP address for the management interface on a CE series switch
The procedure for configuring an IP addresses for the management interface on a CE series switch is described on the right.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top