CX210 CLI login method

0

You can log in to the CLI of the CX210 in any of the following three ways:
? SSH (remote)
? Web tools (remote)
? SYS serial port (local)

For details, see "Logging In to the FC Switching Plane" in the CX210 Switch Module V100R001C10 User Guide.
http://support.huawei.com/enterprise/en/doc/DOC1000053379/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Other related questions:
Number of concurrent server BMC connections
The WebUI of server iBMC or iMana supports a maximum of four concurrent logins. The CLI supports a maximum of five concurrent logins.

How can I disable the MCU web login function in CLI mode?
To disable the MCU web login function in CLI mode, perform the following operations: Log in to the MCU main control board in Telnet or SSH2 mode (the user name and password are admin and admin or admin and Change_Me). Access the system configuration interface. Then, run the following commands: sys [HUAWEI VP9630]telnet-config [HUAWEI VP9630-Telnet]enable- enable-http enable-logon enable-network-login enable-security-mode //Set enable-http to 0 to disable the web login function. [HUAWEI VP9630-Telnet]enable-network-login enable-network-login [HUAWEI VP9630-Telnet]enable-network-login - mode{0:only enable FE0, 1:only enable GE0, 2:only enable GE1 3:enable all interface, default:3} //For security purposes, you may need to disable some ports.

Incorrect password upon login to a newly delivered OSN 8800 using the CLI
The password of the root user has been changed to Changme_123.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top