Configuring the FC switching plane of the CX210

1

The following documents provide information about how to configure the FC switching plane for the CX210:

CX210 user guide:
http://support.huawei.com/enterprise/en/doc/DOC1000053379/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

MX210 command reference: http://support.huawei.com/enterprise/en/doc/DOC1000032096/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Other related questions:
Default IP address of CX911 FC
The default IP address of the CX911 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 192.168.1.100 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Default IP address of CX912 FC
The default IP address of the CX912 FC switching plane is provided below. Other switching planes or BMC is not configured with a default IP address. IP address: 10.77.77.77 Subnet mask: 255.255.255.0 Default gateway: 0.0.0.0

How to configure an FC interface on a CE series switch
Before configuring an FC interface, install an FC optical module. If the LINK indicator of a service interface is steady green, the interface is in Up state. # Switch 10GE1/0/1 to an FC interface. system-view [~HUAWEI] port mode fc 10ge 1/0/1 Warning: This operation will cause all the other configurations on the port to be lost. Continue? [Y/N]:y [*HUAWEI] commit # After configuring an FC interface, check the interface status. If the physical state and protocol state of the interface are both UP, the interface has been enabled. [~HUAWEI] display interface fc 1/0/1 FC1/0/1 current state : UP (ifindex: 144) Line protocol current state : UP ......

Management plane of the network planes for the eBackup
The management plane is divided into two sub-planes: backup management plane and production management plane. The backup management plane serves as the communication plane for eBackup to provide external services. You can use the IP address of this plane to log in to the eBackup backup management system through a maintenance terminal or a third-party system to configure and manage backup and recovery services. The production management plane serves as the communication plane between the backup server/backup proxy and the management plane at the production end.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top