Configuring Monitor Link of the CX111

0

Monitor Link monitors the uplink interface status and changes the downlink interface status when the uplink interface status changes. The uplink interface and downlink interfaces form a Monitor Link group.
When a device connects to an upstream device through a single uplink, services are interrupted if a single point failure occurs. In dual-homing networking, a downstream device is connected to two upstream devices to reduce impact of single point failures and improve network reliability.

Configure Monitor Link of the CX111 by following the instructions provided in the configuration guide:
http://support.huawei.com/enterprise/en/doc/DOC1000041694/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Other related questions:
Whether the CX111 provides GE or 10GE ports
Yes, the CX111 provides GE and 10GE ports for switching data with external networks.
? Four 10GE optical ports
? 12 GE electrical ports

Default user name and password of the CX11x
The default user name and password of the BMC and GE switching plane of the CX11x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name.

BFD and VRRP association on S series switch
For details about BFD for VRRP configuration on an S series switch, except S1700, see Example for Configuring Association Between VRRP and BFD to Implement a Rapid Active/Standby Switchover in the S1720&S2700&S3700&S5700&S6700&S7700&S9700 Typical Configuration of Typical Features.The configurations on all models are the same.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top