CX110 ports

0

CX110 provides the following external ports:
? One BMC serial port: The port is used to log in to the BMC CLI.
? One SYS serial port: The port is used to manage, maintain, and commission the GE switching plane.
? Four 10GE optical ports: The ports are used to exchange data with an external network.
? 12 GE electrical ports: The ports are used to exchange data with an external network.


The CX110 provides the following internal ports:
? 32 GE ports: The ports connect to the front half-width slots 01 to 16.
? Two 40GE ports: The ports are used to connect 10GE switching planes of the switch modules in the 1E and 4E slots or in the 2X and 3X slots.
? Two GE ports: The ports connect to two MM910s respectively. They are used to communicate with the MM910.

Other related questions:
Whether the CX110 provides GE or 10GE ports
Yes, the CX110 provides GE and 10GE ports for switching data with external networks. Four 10GE optical ports 12 GE electrical ports

Default user name and password of the CX11x
The default user name and password of the BMC and GE switching plane of the CX11x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name.

Whether the CX311 supports L3 switching
The CX311 supports L3 switching.

Whether the CX913 supports GE or 10GE ports
The CX913 panel provides 16 x 10GE optical ports. The ports adapt to GE ports.

CX310 ports
The CX310 provides the following external ports: ? One BMC serial port, which is used for logging in to the BMC CLI. ? One SYS serial port, which is used for local management, maintenance, and GE switching plane commissioning. ? Sixteen 10GE optical ports, which are used for exchanging data with external networks. The CX310 provides the following internal ports: ? Thirty-two 10GE ports, which are connected to half-width compute node slots 1 to 16. The subcards corresponding to the slots are numbered from 1 to 16. ? One 40GE port, which is used to interconnect the switch modules in slots 1E and 4E or in slots 2X and 3X. ? Two GE ports, which are connected to the two MM910s respectively for communicating with the internal ports eth0 and eth2 on the MM910s.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top