CX110 CLI login method

0

You can log in to the CLI of the CX110 in any of the following three ways:
? SSH (remote)
? SOL (remote)
? SYS serial port (local)

For details, see "Logging In to the CLI of Each Switching Plane" in the CX110 Switch Module V100R001C10 User Guide.
CX110 user guide:
http://support.huawei.com/enterprise/en/doc/DOC1000068625/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Other related questions:
Number of concurrent server BMC connections
The WebUI of server iBMC or iMana supports a maximum of four concurrent logins. The CLI supports a maximum of five concurrent logins.

Default user name and password of the CX11x
The default user name and password of the BMC and GE switching plane of the CX11x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name.

Whether the CX110 provides GE or 10GE ports
Yes, the CX110 provides GE and 10GE ports for switching data with external networks. Four 10GE optical ports 12 GE electrical ports

How can I disable the MCU web login function in CLI mode?
To disable the MCU web login function in CLI mode, perform the following operations: Log in to the MCU main control board in Telnet or SSH2 mode (the user name and password are admin and admin or admin and Change_Me). Access the system configuration interface. Then, run the following commands: sys [HUAWEI VP9630]telnet-config [HUAWEI VP9630-Telnet]enable- enable-http enable-logon enable-network-login enable-security-mode //Set enable-http to 0 to disable the web login function. [HUAWEI VP9630-Telnet]enable-network-login enable-network-login [HUAWEI VP9630-Telnet]enable-network-login - mode{0:only enable FE0, 1:only enable GE0, 2:only enable GE1 3:enable all interface, default:3} //For security purposes, you may need to disable some ports.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top