Whether AR NAT Server Global address is NAT Outbound address in the address pool?

8

Yes

Other related questions:
Can the global address of the NAT server be within the address pool of outbound NAT
The global address of the NAT server can be the address in the outbound NAT address pool.

Can the global address of the NAT server be an address in the NAT address pool
No, the global address of the NAT server cannot be an address in the NAT address pool.

Whether an address in the NAT address pool can be configured as a public IP address for NAT Server
Yes.

Whether addresses in the NAT address pool are contiguous addresses
No. The NAT address pool contains IP addresses within a range specified by the start address and end address. You can use the address exclusion function to eliminate certain special IP addresses within in this IP address range. Therefore, the addresses in the NAT address pool may not be contiguous. In addition, the start address and the end address can be the same. In such a situation, only one address exists in the NAT address pool.

Whether USG2000&5000 series devices support virtual addresses in NAT Outbound (source NAT) and NAT Server (virtual server) address translation in hot standby deployment
Whether the device supports virtual addresses in NAT Outbound (source NAT) and NAT Server (virtual server) address translation If firewall hot standby is implemented at the enterprise edge, VRRP is enabled, and the virtual address is used for communication with the carrier, NAT Outbound and NAT Server cannot use physical addresses of firewall interfaces. Otherwise, after the active firewall is switched as the standby firewall, the network may be interrupted.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top