Altitude requirement of the CH242 V3

0

Altitude requirement of the CH242 V3:
40℃@900m
When the device is used at an altitude of 900 m to 3000 m (2952.8 ft to 9842.5 ft), the highest operating temperature decreases by 1°C (1.8°F) as the altitude increases by 300 m (984.24 ft).

Other related questions:
Is a license required for the 3DC feature of V3 storage products?
3DC uses the remote replication feature. When 3DC is configured, each device needs to contain the remote replication license.

What impact of a high altitude has on S series switches
Normal operations of S series switches have requirements for the altitude. An increasing altitude will affect the working temperature range of some switches. You can use Enterprise Network Product Hardware Query Tool to query the operating altitude and temperature of a switch. Click a switch model under Chassis in the query result, and view specifications of this switch.

Requirements for NAS service port bonding on the OceanStor V3 storage
The network port binding mode of OceanStor V3 storage systems is bond4. After port bonding, the following restrictions apply: 1. You must configure the 802.3ad dynamic link aggregation control protocol (LACP) mode for corresponding bond ports on the switch. 2. The storage system does not support the following port binding modes: Bonding of both GE and 10GE ports Bonding of ports on different interface modules or on different nodes FCoE ports cannot be bonded.

Environmental corrosion level requirements of storage products
1. The corrosion rate of the copper test wafer is lower than 300 ?b per month in compliance with ANSIc/ISAd-71.04 environmental corrosion G1 level. 2. The corrosion rate of the silver test wafer is lower than 200 ? per month in compliance with ANSIc/ISAd-71.04 environmental corrosion G1 level. You are advised to ask a professional organization to monitor environmental corrosion levels in the equipment room.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top