How do I view IP address allocation in the DHCP server address pool

2

Run the display ip pool [ { interface interface-pool-name | name ip-pool-name } [ start-ip-address [ end-ip-address ] | all | conflict | expired | used ] ] command to view IP address allocation.

Other related questions:
Check address allocation on S series switch
On S series switches except S1700 switches, you can view information about IP addresses in an address pool as follows: - If an interface address pool is used, run the display ip pool [ interface interface-pool-name [ start-ip-address [ end-ip-address ] | all | conflict | expired | used ] ] command. - If a global address pool is used, run the display ip pool [ name ip-pool-name [ start-ip-address [ end-ip-address ] | all | conflict | expired | used ] ] command. You can configure fields in the command as required: - To view information about all IP addresses in an address pool, specify all. - To view information about conflicting IP addresses in an address pool, specify conflict. - To view information about expired and idle IP addresses in an address pool, specify expired. - To view information about used IP addresses in an address pool, specify used. - To view information about a specific IP address or an IP address range in an address pool, specify start-ip-address [ end-ip-address ].

Delete static IP addresses from the global address pool on S series switch
On an S series switch, you run the undo static-bind [ ip-address ip-address | mac-address mac-address ] command to delete a static IP address from a global address pool. For example: - Delete a static IP address based on a specified IP address: [HUAWEI] ip pool global1 [HUAWEI-ip-pool-global1] undo static-bind ip-address 10.10.10.10 - Delete a static IP address based on a specified MAC address: [HUAWEI] ip pool global1 [HUAWEI-ip-pool-global1] undo static-bind mac-address dcd2-fc96-e4c0

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top