Rated input voltage of the CH121 V3

0

Rated input voltage of the CH121 V3: 12 V DC

Other related questions:
Rated input voltage of the PDU on OceanStor 9000 V100R001C01
The rated input voltage of the PDU on OceanStor 9000 V100R001C01 ranges from 100 V AC to 240 V AC; 50 Hz or 60 Hz.

What are the voltage and current parameters on a U1900 series unified gateway?
The voltage and current parameters on the U1980 are listed as follows: Input voltage (AC): 100?240 V AC Maximum power consumption in full configuration: 400 W Input current (AC): 6 A Maximum output power (AC): 500 W The voltage and current parameters on the U1981 are listed as follows: Input voltage (AC): 100?240 V AC Maximum power consumption in full configuration: 220 W Input current (AC): 4.5 A Maximum output power (AC): 300 W The voltage and current parameters on the U1960 are listed as follows: Input voltage (AC): 100?240 V AC Maximum power consumption in full configuration: 220 W Input current (AC): 3.5 A Maximum output power (AC): 300 W The voltage and current parameters on the U1930 are listed as follows: Input voltage (AC): 100?240 V AC Maximum power consumption in full configuration: 220 W Input current (AC): 3.5 A Maximum output power (AC): 300 W The voltage and current parameters on the U1910 are listed as follows: Input voltage (AC): 100?240 V AC Maximum power consumption in full configuration: 200 W Input current (AC): 3.5 A Maximum output power (AC): 300 W The voltage and current parameters on the U1911 are listed as follows: Input voltage (AC): 100?240 V AC Maximum power consumption in full configuration: 150 W Input current (AC): 3.5 A Maximum output power (AC): 300 W

What is input voltage of IPC2702?
IPC2702 supports DC power supply through a power adapter and PoE. The input voltage for DC power supply through a power adapter ranges from 10.8 V to13.2 V (2 A). The input voltage for PoE is 48 V.

Powering on an E9000
Power on an E9000 server as follows: ? If the E9000 chassis is not powered on, connect the power cables to the mains supply. The blades, switch modules, and management modules will be powered on with the chassis. ? If the chassis is powered on but the blades, switch modules, and management modules are not installed, install the modules. These modules will be automatically powered on after being installed. ? In routine maintenance, power on or off the blades or switch modules on the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top