Can the global address of the NAT server be an address in the NAT address pool

16

No, the global address of the NAT server cannot be an address in the NAT address pool.

Other related questions:
Can the global address of the NAT server be within the address pool of outbound NAT
The global address of the NAT server can be the address in the outbound NAT address pool.

Whether AR NAT Server Global address is NAT Outbound address in the address pool?
Yes

Whether an address in the NAT address pool can be configured as a public IP address for NAT Server
Yes.

Whether addresses in the NAT address pool are contiguous addresses
No. The NAT address pool contains IP addresses within a range specified by the start address and end address. You can use the address exclusion function to eliminate certain special IP addresses within in this IP address range. Therefore, the addresses in the NAT address pool may not be contiguous. In addition, the start address and the end address can be the same. In such a situation, only one address exists in the NAT address pool.

Can addresses in a NAT address pool be configured as public addresses mapped to private addresses of intranet servers on an FW enabled with NAT server
Yes.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top