Server hard disk indicator status descriptions


The states of Huawei server hard disk indicators are described as follows:
(Upper) Hard disk alarm/UID indicator:
? Off: The hard disk is operating normally or not detected in a RAID array.
? Blinking yellow: The hard disk is being located, or RAID is being rebuilt.
? Steady yellow: The hard disk cannot be detected or is faulty.

(Lower) Disk operating indicator:
? Off: The hard disk is faulty or not detected.
? Blinking green: Data on the hard disk is being read, written, or synchronized.
? Steady green: The hard disk is normal and inactive.

Other related questions:
Checking server hard disk status
You can use any of the following methods to check hard disk status: 1. Check each hard disk status indicator. 2. Check hard disk status on the iMana WebUI. 3. Check hard disk status in the Configuration Utility of the RAID controller card.

Hard disk capacity of servers
For details about the hard disk types and capacities, see the server compatibility list.

Mounting hard disks for the USG6000 series
After hard disk installation for the first time on the USG6000, the hard disk will be automatically mounted upon device power-on and startup. Run the display disk information command to check whether Filesystem Status is Mounted. If yes, the hard disk works properly. The USG6000 also provides the disk online command that enables the hard disk to go online and to mount services. For example, after hard disk replacement when the device is powered on, you need to run the disk online command for the hard disk to start work. After running the disk online command, you can also run the display disk information command to view the hard disk mounting result. If Filesystem Status is Mounted, the hard disk is successfully mounted.

Query hard disk SN of a server
The hard disk serial number (SN) starts from 2102. You can obtain SN information from the SN label on the hard disk case.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top