Querying server MAC address

0

To query the network port MAC address, log in to the BMC CLI and run the ipmcget -d macaddr command.

Other related questions:
Query MAC address flapping records on S series switch
When loops occur on S series switches (except S1700), MAC address flapping often occurs. You can check whether MAC address flapping occurs on a switch to determine whether a loop occurs on the switch. Methods to check MAC address flapping vary depending on the system version. 1. In versions earlier than V200R001 on S series switches: Run the display trapbuffer command. If the command output displays MAC move detected, MAC address flapping occurred on the switch. 2. E series switches and S series switches running V200R001 and later versions: - Run the display trapbuffer command. If the command output displays MAC move detected, MAC address flapping occurred on the switch. - Run the display mac-address flapping record command. If information is displayed, MAC address flapping occurred on the switch.

Query of the MAC address on OSN 6800
Ping the IP address of the NE on a computer, and run the ARP -A command to query the MAC address mapping table.

How to query the MAC address of an IP phone?
Querying the MAC address of an eSpace 7900 IP phone On the LCD screen, choose Application > Status > Network status. The value of Ethernet MAC displayed at the bottom of the Network status screen is the MAC address of the 7900 IP phone. Querying the MAC address of an eSpace 8950 IP phone 1. On the LCD screen, tap four block icons. On the Application tab page, tap Setting. 2. On the displayed screen, tap About IP Phone and then Status On the displayed screen, you can view the peripheral status, network status, and MAC address of the phone.

How do I query the MAC address of an HD or SD endpoint?
You can query the MAC address of an HD or SD endpoint using any of the following methods: - (HD endpoint only) On the endpoint's web interface, choose Maintenance > System Status > Line Status to view the MAC address. - (HD endpoint only) On the endpoint's (for example, ViewPoint 9000) user interface, choose Diagnostics > Status > Line Status to view the MAC address. - To query the MAC address, perform the following steps: a. Set the IP address of the computer to an IP address which is in the same network segment as that of the endpoint. b. Choose Start > Run. In the text box, enter: ping IP address of the endpoint c. After the command is executed, enter arp -a to query the MAC address. - Use SSH2 to log in to an endpoint (The default user name and password are both debug), enter main macaddr, press Enter to query the MAC address of the endpoint.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top