Powering off an E9000

1

Power off an E9000 as follows:
1. Power off the blades or switch modules in an E9000 chassis using the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html.
2. Disconnect the E9000 power cable from the mains supply.

Other related questions:
Impact of restart on E9000 switch module TR mode
If the TR mode is set for E9000 switch modules, the restart will not change the TR mode.

Powering on an E9000
Power on an E9000 server as follows: ? If the E9000 chassis is not powered on, connect the power cables to the mains supply. The blades, switch modules, and management modules will be powered on with the chassis. ? If the chassis is powered on but the blades, switch modules, and management modules are not installed, install the modules. These modules will be automatically powered on after being installed. ? In routine maintenance, power on or off the blades or switch modules on the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html.

How can I power off the DP300?
To power off the DP300: Tap the power button in the lower right corner of the display twice or turn the power switch on the right panel to OFF.

How to Power Off FusionStorage.
Stop the FusionStorage service. Use PuTTY to log in to the active FSM node. Ensure that the management IP address and user dsware are used to establish the connection. Run the following command to disable user logout upon system timeout: TMOUT=0 Run the following command to stop the FusionStorage service: /opt/dsware/client/bin/dswareTool.sh --op stopDSwareService Information similar to the following is displayed: This operation is high risk,please input y to continue: Enter y as prompted. Enter username cmdadmin and its password as prompted. The default password of user cmdadmin is cmdHuawei@123. The service is successfully stopped if information similar to the following is displayed: Operation finish successfully. Result Code:0 [Tue May 10 16:16:36 CST 2016] DswareTool operation end. Power off the virtualization environment or servers. If FusionStorage is deployed in converged mode, power off the virtualization environment by following operations in the corresponding software documentation. If FusionStorage is deployed in separated mode, power off servers by following operations in the corresponding server documentation.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top