Setting SNMP for a rack server

1

For details about how to set SNMP for a rack server, see:
Configuring SNMP on iMana
Configuring SNMP on iBMC

Other related questions:
Default BMC IP address, user name, and password of a rack server
The default IP address and subnet mask of the BMC (iBMC or iMana) for rack servers are as follows: Default IP address: 192.168.2.100 Default subnet mask: 255.255.255.0 The default user name and password of the BMC (iBMC/iMana) are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root.

Powering on a rack server
If the PSUs are installed properly in a rack server but not powered on yet, power on the PSUs. The server will power on with the PSUs. If the PSUs are powered on and the rack server is on standby, you can power on the server using any of the following methods: -Press the power button on the front panel of the server. -Log in to the iBMC CLI, and run the ipmcset -d powerstate -v 1 command. -Log in to the iBMC WebUI, choose Power > Power Control, and click the Power On button.

Rack server documents
Rack server documentation: http://support.huawei.com/ehedex/hdx.do?docid=DOC1000010818&lang=en&idPath=7919749|9856522|21782478|21782482|9901881&clientWidth=1520&browseTime=1493177342179 RH2265 V2, RH2265H V2, RH2268 V2, and RH2268H V2 are distribution products. To obtain documents of these servers, visit http://support.huawei.com/ehedex/hdx.do?docid=DOC1000015050&lang=zh.

Rack server
A rack server is a standard size server used for mounting inside a 19-inch rack-mount cabinet. Rack servers are most commonly available in 1 U (4.45 cm), 2 U, 4 U, 6 U, and 8 U sizes. Rack servers improve deployment density in limited space.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top