Enabling the GPU card on an RH2488 V2 server

0

To enable the GPU video card on an RH2488 V2, perform the following steps:
1. Power on the server, and press DEL during the server startup process to enter the BIOS setup interface.
2. Choose Advanced PCI/PnP Configuration, and set Onboard VGA Device to Disabled and set Boot Graphic Adapter Priority to Auto.

Other related questions:
Server buzzer alarm sound
Currently server buzzer alarm sounds only make sense for the RH2488 V2: Power supply alarm: one long beep. A long beep usually means that a PSU fault occurs, or that two PSUs are present but only one has AC power input. Please check the power supply status and whether the power cable is connected properly. Backplane alarm: one long beep. If this sound is made, check the power supply and signal. RAID controller card alarm: beep once per second. This alarm usually means a RAID controller card or hard disk exception, for example, hard disk fault, RAID disk offline, RAID degrade, or RAID rebuild.

Whether Huawei servers support independent graphics cards
1. Huawei servers support independent graphics cards. 2. You are advised to install an independent GPU graphics card on the PCIe3.0 x16 slot.
3. To use the GPU, set the GPU on the BIOS to primary.

Whether desktop servers support GPUs
Desktop servers support Graphics Processing Units (GPUs).

GPU sharing server OS version
GPU sharing servers use Windows 7 Service Pack 1 64-bit.

V2 rack server NC-SI
iMana supports the NC-SI (Network Controller Sideband Interface) feature, that is, a physical network port can be used as both a management network port and a service network port. This feature allows users to access iMana through a service network port.
You can enable or disable the NC-SI features on the iMana or BIOS interface. By default, NC-SI is disabled.

For details about the NC-SI features, see http://support.huawei.com/ehedex/hdx.do?docid=DOC1000010818&lang=en&idPath=7919749|9856522|21782478|21782482|9768163&clientWidth=1520&browseTime=1494379275224.

For details about the NC-SI configuration, see http://support.huawei.com/ehedex/hdx.do?docid=DOC1000010818&lang=en&idPath=7919749|9856522|21782478|21782482|9768163&clientWidth=1520&browseTime=1494379275224.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top