Configuring BMC domain users

0

The server BMC system only provides access interface for LDAP users. Using user domains, group domains, LDAP user names and password to log in to the BMC system can improve system security. LDAP users can access the BMC system only through the BMC interface.

1. For V2 servers, log in to the iMana WebUI as user root and perform LDAP configuration. For details, see the online help of iMana.

2. For V3 servers, log in to the iBMC WebUI as user root and perform LADP configuration. For details, see the online help of the iBMC WebUI.

Other related questions:
Server BMC user guide
The iMana User Guide applies to the RH2288H V2 and RH5885 V3 servers. Click http://support.huawei.com/enterprise/en/doc/DOC1000038843 to obtain it. The iBMC User Guide applies to RH1288 V3, RH2288 V3, RH2288H V3, RH1288A V2, RH2288A V2, RH5288 V3, and RH8100 V3 servers. Click http://support.huawei.com/enterprise/en/doc/DOC1000054725 to obtain it.

Default IP address, user name, and password of an E6000 blade
The iMana (BMC) default user name and password of an E6000 blade are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root. The default IP address and subnet mask of the iMana (BMC) in slots 1 to 10 are as follows: Default IP address: 10.10.1.101 to 10.10.1.110 Default subnet mask: 255.255.255.0 To log in to the BIOS of the E6000 blade, you may need to enter the default password uniBIOS123.

How to configure a user level on an AR router
Methods of configuring user levels vary with specific scenarios (command lines):
- Configure a user level for a user.
[Huawei] aaa
[Huawei-aaa] local-user user1 privilege level 15  //Set the user level of user 1 to 15.  
-  Configure a user level for all users under a domain.
[Huawei] aaa
[Huawei-aaa] service-scheme sch1
[Huawei-aaa-service-sch1] admin-user privilege level 15  //Set the user level of all users under a domain to 15.  
-  Configure a user level for all users who log in through a page (take the VTY view as an example).
[Huawei] user-interface maximum-vty 15
[Huawei] user-interface vty 0 14
[Huawei-ui-vty0-14] user privilege level 15  //Set the user level in the VTY 0 to VTY 14 views to 15.
The preceding command is used to modify a user level as well. This command overwrites preceding operation results. Therefore, if this command is run multiple times, the last-time operation prevails.
If the user level configured on a page conflicts with the corresponding operation permission of a user, the operation permission prevails.

Configure a user level in web mode.
1.  Choose User Management > User Management.
2.  Click an icon of a desired local user from the user list.
3.  Enter corresponding content.
  a.  The super administrator enters Access level in order to modify the access level of other users.
  b.  To change Access level from the common user to the administrator (common administrator, enterprise administrator, or super administrator), enter New password and confirm Confirm password.

BMC (iMana) user lockout
If a user account is locked, wait 5 to 11 minutes. The user account will be unlocked automatically.

Sequence of 802.1X user priorities configured based on domains
The priorities are as follows (in descending manner): 1. User-carrying domain name 2. Default domain under the system view

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top