E9000 switch module configuration assistant

6

Go to Link.

Other related questions:
E9000 networking assistant
The E9000 Server Mezz Card-Switch Module Networking Assistant rapidly determines the mapping between mezzanine card ports and switch module ports of an E9000 server, increasing networking efficiency. You can obtain the tool at: E9000 networking assistant

E9000 connection by using SOL
The E9000 server can connect to compute nodes and switch modules in the chassis by using the SOL function provided by the MM910, facilitating remote maintenance. For details, visit the following link: http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/out/e9000_grua_inst_ch220/SemiXML%28e9000_ch220_semi%29/osca/chassis_troubleshooting/it_osca_troubleshooting_500015.html

E9000 switch module working mode
When connecting the CX311 or CX911 switch modules of E9000 servers with FC switches through FC ports, you must change the working mode of the switch modules. The CX311 FCoE gateway and CX911 FC switching plane provide two working modes: Full Fabric (default mode) and Transparent (TR). You must set the working mode based on the connected devices. For details about the specific configuration, query with the keyword "CX311 working mode" or "CX911 working mode".

Compatibility between E9000 switch modules and subcards of blades
For details about the mapping between the E9000 switch modules and the mezzanine cards of the blades, see http://support.huawei.com/huaweiconnect/enterprise/thread-268293.html.

Whether switch modules used on the E9000 support NAT
The switch modules used on the E9000 do not support the NAT function.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top