Entering the RAID configuration interface

3

If the server is configured with an LSI 1078, 2208, or 3108 RAID card, press Ctrl+H during the server startup process.
If the server is configured with an LSI 1064, 1068, 2308, or 3008 RAID card, press Ctrl+C during the server startup process.
If the server is configured with SoftRAID, press Ctrl+M after the hard disk self-test during the server startup process.

Other related questions:
Entering the BIOS interface of a server
Enter the BIOS in any of the following ways: Press the Delete key during the POST process to enter the BIOS user mode menu. Press ctrl+alt+1 (number1, not the letter l) during the POST process to enter the BIOS advanced menu. (This method is not recommended because if BIOS key parameters are modified by mistake the server cannot operate properly.) A password is required for logging in to the BIOS. The default password is Huawei12#$ or uniBIOS123. For RH5885 V2 servers, the default password is Huawei5885.

Location saving the RAID configuration
The RAID configuration information is stored on a hard disk. Replacing the RAID card will not cause loss of RAID configuration or data.

Configuring RAID card
Manuals: For details about how to configure the RAID card and precautions, see http://support.huawei.com/enterprise/en/doc/DOC1000004186?idPath=7919749|9856522|21782478|19955021|19961397. Videos: LSI SAS2208 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-243427.html LSI SAS2308 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-243441.html LSI SAS3008 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-281743.html LSI SAS3108 RAID Controller Card Configuration http://support.huawei.com/huaweiconnect/enterprise/thread-281765.html

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top