Restarting the iBMC of a server

7

Log in to the iBMC CLI, and run the ipmcset -d reset command.

Other related questions:
Querying the BMC (iMana) version
You can use either of the following methods to query the iBMC or iMana version: Log in to the iBMC or iMana management network port using the CLI, and run the ipmcget -d version command. The value of Active iMana in the command output indicates the version of the BMC. Log in to the BMC WebUI, and choose Configuration > Firmware Upgrade. The versions of the active and backup BMC images are displayed.

Server BMC user guide
The iMana User Guide applies to the RH2288H V2 and RH5885 V3 servers. Click http://support.huawei.com/enterprise/en/doc/DOC1000038843 to obtain it. The iBMC User Guide applies to RH1288 V3, RH2288 V3, RH2288H V3, RH1288A V2, RH2288A V2, RH5288 V3, and RH8100 V3 servers. Click http://support.huawei.com/enterprise/en/doc/DOC1000054725 to obtain it.

iBMC SNMP interface description
The iBMC SNMP Interface Description is issued with the MIB software package (for example, RH2288H V3-iBMC-MIB-V193.zip). The following is an example of the issue address: Link

How to restart the plug-in service on the Nagios server?
Step 1 Run the following command to check whether the plug-in service has been started: # ps -ef | grep trapd.py | grep -v grep The following information indicates that the plug-in service has been started. If this information is not displayed, wait patiently. The plug-in service will start automatically in two minutes. nagios 22237 1 1 18:06 ? 00:00:00 python /usr/local/nagios/bin/huawei_server/trapd.py NOTE: 22237 in the preceding information is the plug-in process ID. Step 2 Run the following command to stop the plug-in service: # kill -9 22237 Step 3 Wait for one minute, and perform Step 1 to verify that the plug-in service has been started. The plug-in service will start automatically after being stopped.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top