Configuring server SNMP

7

For details, see "SNMP Configuration" in Link.

Other related questions:
Configuring server SNMP
For details, see "SNMP Configuration" in Link.

Server alarm generation
Servers report alarms using the Simple Network Management Protocol (SNMP).

Setting SNMP for a rack server
For details about how to set SNMP for a rack server, see: Configuring SNMP on iMana Configuring SNMP on iBMC

SNMP configuration on S series switch
S series switches (except S1700 switches) support three SNMP versions: SNMPv1, SNMPv2c, and SNMPv3. SNMPv1 and SNMPv2c use community names for authentication, resulting in low security, whereas SNMPv3 uses authentication and encryption technologies to enhance security. The following uses SNMPv2c configuration as an example: [HUAWEI] snmp-agent //Enable SNMP. [HUAWEI] snmp-agent sys-info version v2c //Set the SNMP version to SNMPv2c. [HUAWEI] snmp-agent community write adminnms01 //Set the SNMP write community name. For common SNMP configuration information, see "Common SNMP Operations" in S1720&S2700&S3700&S5700&S6700&S7700&S9700 Series Switches Common Operation Guide. For typical SNMP configuration examples, see "Typical SNMP Configuration" in "Typical Network Management and Monitoring Configuration" of S1720&S2700&S3700&S5700&S6700&S7700&S9700 Typical Configuration Examples. Common configuration and typical configuration examples for S9300 and S12700 series switches are the same as those for Sx700 series switches. The Sx700 series switches are used as an example here.

What are SNMP commands and what are their functions for S series switches
S series switches (except S1700) use different commands to implement different SNMP functions. For example: snmp-agent //Enable SNMP. snmp-agent sys-info version //Configure the SNMP version. snmp-agent community //Configure an SNMP read-write community name. snmp-agent target-host trap //Configure the destination address to receive traps. snmp-agent community complexity-check disable //Disable community name complexity check. For details on SNMP commands, click S2750&S5700&S6700 V200R003(C00&C02&C10) Command Reference and choose Network Management and Monitoring Commands > SNMP Configuration Commands. Choose corresponding materials based on the device model and version. S series fixed switches are used here as an example.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top