Querying the BMC (iMana) version

14

You can use either of the following methods to query the iBMC or iMana version:
Log in to the iBMC or iMana management network port using the CLI, and run the ipmcget -d version command. The value of Active iMana in the command output indicates the version of the BMC.
Log in to the BMC WebUI, and choose Configuration > Firmware Upgrade. The versions of the active and backup BMC images are displayed.

Other related questions:
Server BMC user guide
The iMana User Guide applies to the RH2288H V2 and RH5885 V3 servers. Click http://support.huawei.com/enterprise/en/doc/DOC1000038843 to obtain it. The iBMC User Guide applies to RH1288 V3, RH2288 V3, RH2288H V3, RH1288A V2, RH2288A V2, RH5288 V3, and RH8100 V3 servers. Click http://support.huawei.com/enterprise/en/doc/DOC1000054725 to obtain it.

BMC (iMana) user lockout
If a user account is locked, wait 5 to 11 minutes. The user account will be unlocked automatically.

Performing one-click information collection on the BMC
Server one-click information collection method: ? iMana: Run the ipmcset -t maintenance -d imtool command. For details, see http://support.huawei.com/ehedex/pages/DOC1000010818YEE0409N/18/DOC1000010818YEE0409N/18/resources/en/cbb/troubleshooting/it_troubleshooting_00035.html. ? iBMC: On the iBMC WebUI, choose Information > Summary > Shortcuts > One-Click Info Collection. For details, see http://support.huawei.com/ehedex/pages/DOC1000010818YEE0409N/18/DOC1000010818YEE0409N/18/resources/en/cbb/troubleshooting/it_troubleshooting_00036.html.

Default IP address, user name, and password of the X8000 BMC
The X8000 server nodes do not have a default iMana (BMC) IP address. Therefore, it is recommended that the RMC be used to implement centralized management. When using an X8000 server node for the first time, query the iMana management port IP address of the node on the RMC. You can log in to the RMC command line interface using Telnet or SSH, and run the following command to query the iMana management network port IP address, DHCP/static mode, and gateway IP address: rmcget -l blade_id -t eth0 -d info In this command: id indicates the serial number of the server node. The value range is 01a to 40a and 01b to 40b. eth0 indicates the iMana management network port. The default iMana user name and password are as follows: Default user name: root Default password: Huawei12#$

Whether an E9000 blade is configured with a default BMC IP address
An E9000 blade is not configured with a default BMC IP address. To log in to the management WebUI of a blade, you need to configure the BMC IP address for the blade first. You can log in to the WebUI of the MM910 and configure the iBMC (iMana) IP address of a blade. For details, see Management Modules > MM910 Management Module User Guide > WebUI Overview (Software Version Is (U54)2.20 or Later) > Chassis Settings in the product documentation. http://support.huawei.com/ehedex/hdx.do?docid=DOC1000053358&lang=en&idPath=7919749%7C9856522%7C21782478%7C19955022%7C19961380&clientWidth=1729&browseTime=1456665583989

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top