How to restart the plug-in service on the Nagios server?

3

Step 1 Run the following command to check whether the plug-in service has been started:
# ps -ef | grep trapd.py | grep -v grep
The following information indicates that the plug-in service has been started. If this information is not displayed, wait patiently. The plug-in service will start automatically in two minutes.
nagios 22237 1 1 18:06 ? 00:00:00 python /usr/local/nagios/bin/huawei_server/trapd.py
NOTE:
22237 in the preceding information is the plug-in process ID.
Step 2 Run the following command to stop the plug-in service:
# kill -9 22237
Step 3 Wait for one minute, and perform Step 1 to verify that the plug-in service has been started.
The plug-in service will start automatically after being stopped.

Other related questions:
How to install the Tecal Nagios plug-in?
Step 1 Run the following command to decompress the installation package: # cd /etc # tar -zxf "Huawei eSight Server Management Plug-in (for Nagios).gz" The decompressed files are stored in the Huawei eSight Server Management Plug-in (for Nagios) folder. Step 2 Run the following command to install the plug-in: # cd "Huawei eSight Server Management Plug-in (for Nagios)" # python setup.py install -d 192.168.1.110 [-p 10061]-n /usr/local/nagios The parameters are described as follows: a. The parameter following -d indicates the IP address of the Nagios server. b. The parameter following -n indicates the installation path of the Nagios tool. NOTE: /usr/local/nagios is an installation directory example. c. The parameter on the right of -p indicates the Nagios alarm listening port. The parameter is optional and its default value is 10061.

How to get the Tecal Nagios plug-in software?
Obtain the plug-in installation package Huawei eSight Server Management Plug-in (for Nagios).gz. To download the installation package, visit http://support.huawei.com/enterprise, and choose Software > IT > Server > APP Server > Server Management Software > Tecal Nagios Plugin > Tecal Nagios Plugin V100 > Tecal Nagios Plugin V100R001 >Tecal Nagios Plugin V100R001C00 > Huawei eSight Server Management Plug-in (for Nagios).gz.

What is the system requirements before installing the Tecal Nagios plug-in?
Before installing the plug-in, ensure that the system meets the following requirements: 1. The Nagios tool is Python-2.4.4. 2. The Nagios is supported Nagios-3.6.1 and Nagios-4.1.1. 3. The following three files exist on the Nagios server: �?pysnmp-4.2.4.tar.gz �?pyasn1-0.1.6.tar.gz �?pycrypto-2.3.tar.gz 4. You have obtained the plug-in installation package Huawei eSight Server Management Plug-in (for Nagios).gz. To download the installation package, visit http://support.huawei.com/enterprise, and choose Software > IT > Server > APP Server > Server Management Software > Tecal Nagios Plugin > Tecal Nagios Plugin V100 > Tecal Nagios Plugin V100R001 >Tecal Nagios Plugin V100R001C00 > Huawei eSight Server Management Plug-in (for Nagios).gz.

What is the Software installation path which installing the plug-in on the Nagios server?
/usr/local/nagios

What modules could Tecal Nagios plug-in managed for all Huawei servers?
All servers managed by Nagios can report PSU, fan module, and RAID controller alarms.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top