What is the Software installation path which installing the plug-in on the Nagios server?

1

/usr/local/nagios

Other related questions:
How to install the Tecal Nagios plug-in?
Step 1 Run the following command to decompress the installation package: # cd /etc # tar -zxf "Huawei eSight Server Management Plug-in (for Nagios).gz" The decompressed files are stored in the Huawei eSight Server Management Plug-in (for Nagios) folder. Step 2 Run the following command to install the plug-in: # cd "Huawei eSight Server Management Plug-in (for Nagios)" # python setup.py install -d 192.168.1.110 [-p 10061]-n /usr/local/nagios The parameters are described as follows: a. The parameter following -d indicates the IP address of the Nagios server. b. The parameter following -n indicates the installation path of the Nagios tool. NOTE: /usr/local/nagios is an installation directory example. c. The parameter on the right of -p indicates the Nagios alarm listening port. The parameter is optional and its default value is 10061.

What is the system requirements before installing the Tecal Nagios plug-in?
Before installing the plug-in, ensure that the system meets the following requirements: 1. The Nagios tool is Python-2.4.4. 2. The Nagios is supported Nagios-3.6.1 and Nagios-4.1.1. 3. The following three files exist on the Nagios server: �?pysnmp-4.2.4.tar.gz �?pyasn1-0.1.6.tar.gz �?pycrypto-2.3.tar.gz 4. You have obtained the plug-in installation package Huawei eSight Server Management Plug-in (for Nagios).gz. To download the installation package, visit http://support.huawei.com/enterprise, and choose Software > IT > Server > APP Server > Server Management Software > Tecal Nagios Plugin > Tecal Nagios Plugin V100 > Tecal Nagios Plugin V100R001 >Tecal Nagios Plugin V100R001C00 > Huawei eSight Server Management Plug-in (for Nagios).gz.

What is the Path for uploading the plugin installation package to the Nagios server?
/etc NOTE: The decompressed software is stored in /etc/ Huawei eSight Server Management Plug-in (for Nagios).

How to get the Tecal Nagios plug-in software?
Obtain the plug-in installation package Huawei eSight Server Management Plug-in (for Nagios).gz. To download the installation package, visit http://support.huawei.com/enterprise, and choose Software > IT > Server > APP Server > Server Management Software > Tecal Nagios Plugin > Tecal Nagios Plugin V100 > Tecal Nagios Plugin V100R001 >Tecal Nagios Plugin V100R001C00 > Huawei eSight Server Management Plug-in (for Nagios).gz.

How to restart the plug-in service on the Nagios server?
Step 1 Run the following command to check whether the plug-in service has been started: # ps -ef | grep trapd.py | grep -v grep The following information indicates that the plug-in service has been started. If this information is not displayed, wait patiently. The plug-in service will start automatically in two minutes. nagios 22237 1 1 18:06 ? 00:00:00 python /usr/local/nagios/bin/huawei_server/trapd.py NOTE: 22237 in the preceding information is the plug-in process ID. Step 2 Run the following command to stop the plug-in service: # kill -9 22237 Step 3 Wait for one minute, and perform Step 1 to verify that the plug-in service has been started. The plug-in service will start automatically after being stopped.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top