E5 2600

3

Intel Xeon E5-2600 and E5-2600 v2 are Sandy Bridge CPUs provided by Intel for mainstream 2-socket servers. Huawei RH2288H V2 and RH1288 V2 servers support E5-2600 and E5-2600 v2 CPUs.

Other related questions:
E5 2600
Intel Xeon E5-2600 and E5-2600 v2 are Sandy Bridge CPUs provided by Intel for mainstream 2-socket servers. Huawei RH2288H V2 and RH1288 V2 servers support E5-2600 and E5-2600 v2 CPUs.

E5 2600 v3
Intel Xeon E5-2600 v3 CPUs adopt the Haswell-EP architecture. Huawei V3 servers, such as RH2288 V3, RH2288H V3, and RH1288 V3, support Intel Xeon E5-2600 v3 CPUs.

Alarm threshold modification for E4 and E5 series OA boards
1. Run the following command to query the alarm thresholds. Pay attention that the board slot ID must be replaced with the actual slot ID and the slot ID must be in decimal format. :cfg-get-almth:5,1,1,sumiop PER-ALM-TH BID PORT PATH TH-TYPE TH-HIGH TH-LOW 5 1 1 sumiop 10 -320 Total records :1 2. Run the following nptp command to query the alarm thresholds on the board side. Pay attention that the board slot ID must be replaced with the actual slot ID and the slot ID must be in hexadecimal format. In the command outputs, TH-HIGH indicates the upper threshold in decimal format and TH-LOW indicates the lower threshold in hexadecimal format. After the lower threshold in hexadecimal format is converted into a value in decimal format, the lower threshold must correspond to the threshold queried in step 1. :nptp:5,13,31,1,0,1,0,94 ncmd 0: 05 13 31 00 00 01 00 01 00 94 00 00 00 0a ff ff fe c0 In the command outputs, 00 00 00 0a is the upper threshold and ff ff fe c0 is the lower threshold. 3. Run the following nptp command to query the alarm thresholds on the board side. Pay attention that the board slot ID must be replaced with the actual slot ID and the slot ID must be in hexadecimal format. The upper threshold is 0x12 in hexadecimal format, which is 18 in decimal format. That is, the upper threshold is 1.8 dB. :nptp:$bid,13,30,1,0,1,0,94,0,0,0,12,ff,ff,fe,c0 ncmd 0: 05 13 30 00 00 In the command outputs, 00 00 00 12 is the upper threshold and ff ff fe c0 is the lower threshold. 4. Query the alarm threshold again to check whether the alarm threshold is successfully modified. :cfg-get-almth:5,1,1,sumiop PER-ALM-TH BID PORT PATH TH-TYPE TH-HIGH TH-LOW 5 1 1 sumiop 18 -320 Total records :1 5. Replace the nptp command in step 2 with the sptp command and then deliver the command again without changing other parameters. In this manner, the command is saved to the NE software and will not be lost during a board reset. :sptp:5,13,30,1,0,1,0,94,0,0,0,12,ff,ff,fe,c0

Whether CPU model E5-2620 meets requirements when the GPU solution uses RH228 V2
In GPU-intensive scenarios, the performance of the E5-2620 (2.0 GHz, 6-core) is 10% to 20% lower than the E5-2680 (2.7 GHz, 8-core), so the E5-2620 is not recommended.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top