Whether switch modules used on the E6000 support NAT

2

The switch modules used on the E6000 do not support the NAT function.

Other related questions:
Whether switch modules used on the E9000 support NAT
The switch modules used on the E9000 do not support the NAT function.

How does the E6000 telnet to a switch module by using a management module?
The E6000 cannot access a switch module in this mode because it does not have the SOL function. You can configure a switch module IP address on the management module, and then connect to the switch module network port to access the switch module by using the client.

Stacking of E6000 NX112 switch modules
After the stack cable is connected to the NX112 switch modules, stack configuration will be automatically performed.

Whether S series switches support NAT
S series switches do not support NAT, but S series modular switches configured with SPUs support NAT. 1. S series fixed switches do not support NAT. 2. S7700 and S9700 series modular switches configured with SPUs support NAT. 3. S9300 series modular switches configured with SPUs support NAT. 4. S12700 series modular switches do not support NAT.

E6000 network port mapping
The on-board NICs of an E6000 are connected to switching planes A1 and A2. The E6000 provides two mezzanine slots (MEZZ 1 and MEZZ 2) for port expansion. The card in MEZZ 1 communicates with B1 and B2 switch modules, and the card in MEZZ 2 communicates with C1 and C2 switch modules.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top