Whether switch modules used on the E9000 support NAT

4

The switch modules used on the E9000 do not support the NAT function.

Other related questions:
Whether switch modules used on the E6000 support NAT
The switch modules used on the E6000 do not support the NAT function.

Whether switch modules used on the E9000 are hot-swappable
The E9000 provides four slots to install switch modules. Switch modules in slots 2X and 3X are in a pair, and switch modules in slots 1E and 4E are in a pair. The two switch modules in a pair of slots can operate independently, in 1+1 redundancy mode, or in load sharing mode by working with the OS and NICs.

E9000 connection by using SOL
The E9000 server can connect to compute nodes and switch modules in the chassis by using the SOL function provided by the MM910, facilitating remote maintenance. For details, visit the following link: http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/out/e9000_grua_inst_ch220/SemiXML%28e9000_ch220_semi%29/osca/chassis_troubleshooting/it_osca_troubleshooting_500015.html

MZ510
MZ510 is a 2-port 10GE CNA. It can be used with the CX31x switch modules.

MZ111
MZ111 is a 4-port GE dual-chip mezzanine card applicable only to the CH140. It can be used with CX110, CX111, and CX116 switch modules.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top