E9000 switch module working mode


When connecting the CX311 or CX911 switch modules of E9000 servers with FC switches through FC ports, you must change the working mode of the switch modules.
The CX311 FCoE gateway and CX911 FC switching plane provide two working modes: Full Fabric (default mode) and Transparent (TR). You must set the working mode based on the connected devices. For details about the specific configuration, query with the keyword "CX311 working mode" or "CX911 working mode".

Other related questions:
What is the working mode of power modules on CE series switches
What is the working mode of power modules on a switch?
By default, power modules on a switch work in load balancing mode. The software of power modules equally distributes power consumption to all the power modules.
You can change the working mode of power modules through the CLI if required.

Impact of restart on E9000 switch module TR mode
If the TR mode is set for E9000 switch modules, the restart will not change the TR mode.

E9000 switch module configuration assistant
Go to Link.

Compatibility between E9000 switch modules and subcards of blades
For details about the mapping between the E9000 switch modules and the mezzanine cards of the blades, see http://support.huawei.com/huaweiconnect/enterprise/thread-268293.html.

Whether switch modules used on the E9000 support NAT
The switch modules used on the E9000 do not support the NAT function.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top