CH121 CPUs

5

The CH121 supports one or two Intel? Xeon? E5-2600/2600 v2 (Sandy Bridge-EP or Ivy Bridge-EP) full-series CPUs, each with up to 12 cores and 70 W, 80 W, 95 W, 115 W, 130 W, and 135 W.
Each CPU integrates a memory controller for supporting four DDR3 memory channels. Each channel supports three DDR3 DIMMs of 1333, 1600, and 1866 MHz.
Each CPU integrates a PCIe controller for supporting PCIe 3.0 and providing 40 lanes.
The two CPUs are interconnected through two QuickPath buses at 8.0 GT/s.
Maximum clock frequency: 3.5 GHz
For details about the CPUs supported by the CH121, see the compatibility checker: http://support.huawei.com/onlinetoolsweb/ftca/en

Other related questions:
Installing OS on a server
Use the Huawei Server Compatibility Checker (http://support.huawei.com/onlinetoolsweb/ftca/en) to check the OS supported by the server. For details about the OS installation methods (using ServiceCD, DVD-ROM drive, image, and PXE), see OS Installation Guide. For details about the OS installation cases (including centOS, Citrix, Debian, Fedora, FreeBSD, Kylin, Oracle Linux, RedFlag, RedHat, Rocky, Solaris, SUSE, Ubuntu, VMware ESXi, and Windows), see http://support.huawei.com/huaweiconnect/enterprise/thread-286397.html.

Default user name and password of the E9000 BMC
The iMana or iBMC of the E9000 blade is not configured with a default IP address. The default user name and password are as follows: Default user name: root Default password: Huawei12#$

Whether an E9000 blade is configured with a default BMC IP address
An E9000 blade is not configured with a default BMC IP address. To log in to the management WebUI of a blade, you need to configure the BMC IP address for the blade first. You can log in to the WebUI of the MM910 and configure the iBMC (iMana) IP address of a blade. For details, see Management Modules > MM910 Management Module User Guide > WebUI Overview (Software Version Is (U54)2.20 or Later) > Chassis Settings in the product documentation. http://support.huawei.com/ehedex/hdx.do?docid=DOC1000053358&lang=en&idPath=7919749%7C9856522%7C21782478%7C19955022%7C19961380&clientWidth=1729&browseTime=1456665583989

Powering on an E9000
Power on an E9000 server as follows: ? If the E9000 chassis is not powered on, connect the power cables to the mains supply. The blades, switch modules, and management modules will be powered on with the chassis. ? If the chassis is powered on but the blades, switch modules, and management modules are not installed, install the modules. These modules will be automatically powered on after being installed. ? In routine maintenance, power on or off the blades or switch modules on the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top